Coiling Doors in Boise, Idaho
When Your Ceiling Has No Room for a Sectional Track, Coiling Is the Answer
Manual, single-phase, and three-phase drive options available - including fire-rated assemblies
Got it. A Hearth technician will call you back. Need help now? Call 208-295-4245.
Sized, specified, and driven to match your facility's actual demands.
- OverheadNo track into your space
- Every timeMeasured on-site
- DriveMatched to cycle demand
- Where requiredFire-rated assemblies
Coiling Doors Solve the Problem a Sectional Door Can't
A coiling door moves straight up. A sectional door swings back horizontal. That single difference changes everything.
A sectional overhead door needs ceiling depth - typically 12 to 18 inches of horizontal track running back into the building. A coiling door doesn't. Its curtain (the interlocking slat assembly that rolls up into a compact coil above the door opening) winds into a hood assembly directly above the frame. No track extends into your space.
That matters the moment you have shelving, racking, or mechanical equipment near the ceiling line. It also matters when your opening is taller than your ceiling clearance allows for a standard track system.
Coiling doors are the specified solution for commercial bays, self-storage facilities, fire stations, industrial warehouses, and loading dock applications throughout Boise. Hearth Garage Doors installs and services rolling steel doors across the region - sized, specified, and driven to match your facility's actual demands.
- Commercial bays
- Self-storage facilities
- Fire stations
- Industrial warehouses
- Loading docks
Boise's Commercial Corridors Are Built for This Door Type
Properties along Gowen Road and near the Boise Airport were built without excess ceiling depth.
A large portion of industrial and warehouse construction along Eisenman Road, Gowen Road, and the logistics corridors near Boise Airport was designed for efficiency - not generous overhead space. Those buildings pack racking systems to the rafters. There's simply no room for a sectional track.
Hearth Garage Doors operates out of S Orchard St in Boise, with the I-84 corridor close by. That puts us within a short drive of the commercial and industrial zones from Caldwell through Boise to Mountain Home. When a facility in the Gowen industrial district needs a coiling door spec'd and installed, we're not driving from across the state.
Roll-up coiling doors Boise properties require are often non-standard in size. We measure on-site. Every time.
- Gowen Road
- Eisenman Road
- Boise Airport logistics
How a Fire Station Bay Taught Me to Respect Hood Sizing
Hood assembly clearance is the detail that separates a smooth install from a costly field fix.
I'm going to walk you through a commercial installation that changed how our crew thinks about coil door service Boise projects from the first site visit.
A municipal fire station needed a replacement rolling steel door on an apparatus bay. The opening was tall - over 14 feet. The wall above it was solid concrete block with no room to relocate utilities or overhead equipment. The previous installation used a hood assembly (the protective enclosure that houses the coiled curtain when the door is open) that was undersized for the curtain's coil diameter at full retraction.
Here's what that caused: at full open, the curtain coil pressed against the structural lintel. The door couldn't reach a safe open position. The fire apparatus had clearance issues every time it responded.
The barrel assembly - the horizontal tube around which the curtain wraps - increases in diameter as the curtain coils tighter. That growth is predictable. You calculate it from the curtain slat gauge, the number of slats, and the full open height. You don't guess.
We replaced the curtain and the hood with the correct assembly. The door now opens fully and clears the lintel with two inches of margin. That margin was engineered, not hoped for.
When Hearth Garage Doors specs an industrial roll-up door for a Boise facility, hood sizing is calculated from actual field measurements - not catalog defaults.
That margin was engineered, not hoped for.
Which Drive Type Is Right for Your Facility?
Drive type - the mechanism that operates your coiling door - determines daily performance, not just horsepower.
A lot of buyers focus on motor size and miss the more important question: how many cycles per day does this door run?
Cycle rating is the number of open-close operations a coiling door is rated to handle before major component service is required. A self-storage unit that cycles twice a day needs a very different configuration than a commercial loading bay that cycles 40 times in a shift.
Here's how we approach the decision:
- Manual push-up or crank-operated
Right for low-cycle applications - storage units, utility bays, seasonal access points. No motor to maintain.
- Single-phase electric motor
The standard specification for most commercial coiling door installations in Boise. Reliable, cost-effective, works on standard commercial power.
- Three-phase motor
Built for high-cycle industrial applications - manufacturing floors, distribution centers, busy loading docks. Requires three-phase power on-site.
We confirm your power supply and cycle demand before we specify any motor. That conversation happens during the site visit, not after the door arrives.
Our Standards for Coiling Door Installation
Every rolling steel door we install is specified to the opening, not pulled from a standing inventory.
Hearth Garage Doors holds itself to a clear set of standards on every commercial coiling door installation in Boise and across the region:
Curtain material specified by applicationgalvanized steel for standard commercial, stainless for food-grade or high-corrosion environments
Hood assembly sized to the calculated coil diameterat full open, with field-verified lintel clearance
Barrel assembly diameterselected based on curtain weight and door height - not catalog default
Drive type and cycle ratingmatched to the facility's documented daily operation
Fire-rated coiling door assembliesavailable where occupancy type requires IBC Chapter 7 and NFPA 80 compliance
All hardware torqued to specand lubricated before final inspection
Our Installation Process
Site Measurement and Specification
We start with the opening. Width, height, wall construction, ceiling clearance above the lintel, and available headroom for the hood assembly. We document your power supply type and confirm your cycle demand. If a fire-rated coiling door is required, we confirm the fire rating classification during this phase.
Component Installation and Drive Setup
The hood and barrel assembly are installed first, anchored to the structural opening. Curtain slats are threaded onto the barrel and tensioned. Drive components - whether manual, single-phase, or three-phase - are mounted and wired. All limit switches and safety sensors are set before the door runs under power for the first time.
Cycle Testing and Handoff
We run the door through a full cycle sequence and check coil clearance at full open. Balance is confirmed - the door should hold position at any point in its travel. Safety reversal is tested. We walk the facility contact through manual release operation before we leave the site.
Areas We Serve
Hearth Garage Doors installs and services coiling doors across the Greater Boise region.
We serve commercial and industrial properties in Boise, Meridian, Nampa, Caldwell, Eagle, Kuna, Star, Garden City, Middleton, Mountain Home, Twin Falls, Jerome, and the surrounding communities. If your facility is along the I-84 corridor or beyond, call us.
Ready to Spec Your Coiling Door?
Hearth Garage Doors will size, specify, and install your commercial coiling door in Boise from the first site visit.
Call us at 208-295-4245 or email info@hearthgaragedoors.com. Tell us your opening dimensions and how often the door cycles each day. We'll handle everything from specification to final inspection.
Send us your address and service need - we dispatch from the Boise Bench.
Got it. A Hearth technician will call you back. Need help now? Call 208-295-4245.
Frequently Asked Questions
Tell us your opening and cycle count: call 208-295-4245.
Yes - coiling doors cost more upfront than comparable sectional doors. The hood assembly, barrel, and curtain slat system require more fabricated steel than a standard panel-and-track setup. That cost difference is real, but relevant only when a sectional door actually fits the space. When ceiling clearance is under 12 inches, a sectional door isn't a cheaper option - it's not an option at all.
Most installations complete in one day once components arrive. The site visit and specification phase takes one to three business days. Lead time on fabricated curtain and hood assemblies varies by curtain gauge and drive type - confirm your timeline during the site visit. High-cycle three-phase drive configurations may require additional lead time compared to standard single-phase motor units.
Motor-driven units are worth it for any door cycling more than five times daily. Manual crank doors work well for low-traffic storage bays and seasonal access points. A motor eliminates daily physical effort and reduces wear caused by uneven manual operation. Single-phase electric motors run on standard commercial power and fit most Boise-area facilities without electrical upgrades.
Fire-rated coiling doors are required in specific occupancy types under IBC Chapter 7 and NFPA 80 - not all buildings need them. Requirements depend on your building's occupancy classification and the fire separation rating of the wall where the door sits. Hearth confirms fire rating requirements during the site measurement phase. Installing a non-rated door where a rated assembly is required creates a code compliance problem.
Standard hoods cause installation failures when the coil diameter at full open isn't calculated first. As the curtain wraps around the barrel, the coil grows in diameter with every slat. An undersized hood forces the coil against the lintel before the door reaches a safe open position. Hearth calculates coil diameter from actual curtain slat gauge and door height - not from catalog defaults.
Non-standard openings are common in older Boise-area commercial buildings, and coiling doors handle them well. Unlike sectional doors, coiling curtains are fabricated to exact width and height specifications. There is no standard panel size to work around. We measure the opening on-site and spec the curtain, barrel, and hood to match - including any variation in wall plumb or lintel level.